uBLOX MAX-M8C Pico Breakout with Chip Antenna

$49.00 Inc. GST
3 Available Now
(More Available Soon)

This is new version of the popular pico break outboard, now with SCL & SDA. The board is assembled with a uBLOX MAX-M8C module, chip antenna and a decoupling capacitor.

This board has VCC, GND and RX & TX, SCL & SDA for I2C.

IMPORTANT : This module has no onboard voltage regulation so a clean regulated 3.3v power is required. If you want to link this to your microcontroller you must ensure it runs at 3.3v on the serial/I2C or you will risk damaging this module. Arduinos/PC Serial generally run at 5V so you will need a level converter.

There is no provision for battery backup (V_BCKUP is hard tied to GND).

The MAX-8 family delivers all the benefits of the u-blox 8 GPS platform in a more compact form factor than ever before: high-sensitivity, intelligent power management.

MAX comes in an ultra-compact, easy-to-mount 9.7mm x 10.1mm LCC package, and supports temperatures down to -40'C.

  • Supports temperatures down to -40'C
  • UART interface.
  • RTC crystal for faster warm and hot starts
  • Suitable for HAB Usage Max Altitude 50,000 meters / 164041 feet  in Flight Mode.
  • Supply Voltage 1.8 to 3.6V

This module is designed to be as light as possible, weight is very light at 1.5g

0 comments on "uBLOX MAX-M8C Pico Breakout with Chip Antenna"

Comment on this product

Just so you know; all our prices include GST, orders over $100.00 qualify for free shipping. Everything that is in stock (green tick icon) ships overnight on CourierPost. A lot of things that have the "blue question mark" stock icon are actually available now direct from our suppliers, please feel free to ask us if you aren't sure.

All our products are sourced through official channels, and come with a manufacturers warranty. Here's our returns policy if you'd like to read it before purchasing.