Arduino Pro 328 - 3.3V/8MHz
$40.00
Inc. GST and shipping
Stock
In Stock
In Stock
CategoryElectronics Gear
ManufacturerSparkFun
Product rating (0 votes)
(click stars to rate)
Tools
del.icio.us
del.icio.us
It's blue! It's
skinny! It's the Arduino Pro! SparkFun's minimal design approach to
Arduino. This is a 3.3V Arduino running the 8MHz bootloader (select
'Arduino Duemilanove w/ 328' within the Arduino software). The power switch was moved to the side of the
board (good idea Limor!) to allow control when a shield is attached.
This board does not work with the 5V Arduino shields but does work
nicely with our prototyping shield.
Please note: Arduino 0015 supports the ATmega328 but not yet at 8MHz. Please select 'Arduino Duemilanove w/ 328' within the Arduino software but expect your delays to work twice as long (code will run half as fast as the Duemilanove at 16MHz).
Please note: The right-angle power switch is fragile. We're working on making the switch stronger. For now, please be gentle.
Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We wanted Arduino Pro to be low profile. The DC power jack footprint is available, but not populated. We recommend running the board with a LiPo battery for better portability.
We really wanted to minimize the cost of an Arduino. The Arduino Pro is like the Arduino Duemilanove (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Features:
Please note: Arduino 0015 supports the ATmega328 but not yet at 8MHz. Please select 'Arduino Duemilanove w/ 328' within the Arduino software but expect your delays to work twice as long (code will run half as fast as the Duemilanove at 16MHz).
Please note: The right-angle power switch is fragile. We're working on making the switch stronger. For now, please be gentle.
Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We wanted Arduino Pro to be low profile. The DC power jack footprint is available, but not populated. We recommend running the board with a LiPo battery for better portability.
We really wanted to minimize the cost of an Arduino. The Arduino Pro is like the Arduino Duemilanove (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Features:
- ATmega328 running at 8MHz external resonator
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, Accelerometers, sensors, etc)
- USB connection off board
- 3.3V regulator
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 3.3V up to 12V
- Resettable fuse prevents damage to board in case of short
- Power select switch acts as on/off switch
-
Arduino Duemilanove
$70.00
-
Arduino Ethernet Shield
$90.00
-
Arduino Mega
$125.00
-
Arduino Pro 328 - 5V/16MHz
$40.00
-
Arduino Project Box
$50.00
-
Arduino Pro Mini 3.3v
$40.00
-
Arduino Pro Mini 5v
$40.00
-
Arduino Xbee Shield
$50.00
-
SparkFun FTDI Breakout 3.3V
$27.00
0 comments on "Arduino Pro 328 - 3.3V/8MHz"
Comment on this product
Just so you know; all our prices include GST and shipping. Everything that is in stock (green tick icon) ships overnight on Courier Post's signature required service for speed and security. A lot of things that have the "blue question mark" stock icon are actually available now direct from our suppliers, please feel free to ask us if you aren't sure.
All our products are sourced through official channels, and come with a manufacturers warranty. Here's our returns policy if you'd like to read it before purchasing.
