Seeeduino StalkerArduino compatible with RTC and microSD

The Seeeduino Stalker with ATMEGA 328P microcontroller is an Arduino compatible board with useful additions to potentially make it an out of the box wireless sensor network node or data logging device. It can be conveniently used as network sensor hub or integrated data collector for environment monitoring, GPS tracking and much much more.

Features

• Arduino compatible, based on Seeeduino (ATMEGA328P)
• Native RTC, On board CR2032 battery holder
• Native micro SD card socket
• Easy stackable I2C pin header
• Dual voltage (5V/3.3V) I2C hub
• Standalone and shield mode
• User defined button and LED
• B” series socket (2*10 pin 2.0mm pitch, same as Xbee)
• Interrupt evoking ready
• Serial interface with DTR for auto reset during programming

Note that the much like the Arduino Pro, the Seeeduino Stalker doesn't include an FTDI USB to serial interface to save on costs. This is useful for both saving power and cost when deploying multiple units. To program these you can use the Seeed Studio UartSB or a FTDI breakout/cable.

Note: With a lack of documentation we believe that the controller (including serial and ISP) runs at 3.3V with an unknown speed. Using 5V may damage the board. Thanks to our helpful customer for the info.

1. Can I use the Stalker with the XBee Pro Wire Antenna?
   Posted by Herbert Halasz — Tuesday, 22 March 2011 @ 16:52
2. Yes it should work fine, see the documentation here;
   
   http://garden.seeedstudio.com/index.php?title=Seeeduino_Stalker_v1.0
   Posted by Hadley Rich — Tuesday, 22 March 2011 @ 17:15

Comment on this product